Mobile Uploads and Snap Route to Map

Posts for this topic...

---

• Post your comments.... Sign In to Post
• plotaroute admin   Friday 19 May 2023 08:22:13

  I'm not sure why it stopped half way through instead of just before the ferry. There is a complex algorithm that tries to match the whole route, so it may have been that to get to the point the other side of the ferry it had to divert half way through the route. 

• Kristian Snelling   Thursday 18 May 2023 20:26:04

  Bah humbug,

  Good shout. Last 1/10th of mile fail! Good spot!

  I will double-check the other two routes that I was fighting with, do not cross the river too - it would make sense and I should know better, I have to change to 'foot' to get across on ferries. 

  However, why does it stop after < 9 miles, when only the last < 1/4 mile is the issue? 

  I fixed it using the 'shorten the route' feature and then returned to the river's other side. All sorted on this one now.

  Thank you

• plotaroute admin   Thursday 18 May 2023 09:08:10

  Hi Kristian,

  Thansk for all that information. It looks like it's caught out by the ferry crossing at Rogätz, as our default bike routing doesn't use ferries. If you change the Activity setting to Walk instead of Bike when you use the Snap Route to Map it should then work. 

• Kristian Snelling   Wednesday 17 May 2023 21:17:00

  Hi team,

  I use the 'snap route to map' feature extensively since its deployment to the site. I have used it many times.

  But I am seeing odd behaviour and it does not appear to be consistent. So I will keep investigating what I believe to be the cause.

  Either way, the outcome is beyond frustrating 
  
  [IMAGE REMOVED DUE TO SIZE]

  This is the length of my 'follow a cycle route' prior to running the command - but it has no directions

  Below are the settings I have chosen: 

  [IMAGE REMOVED DUE TO SIZE]

  This is now the route length!
  
  [IMAGE REMOVED DUE TO SIZE]
  
  Confirmed by the route length panel
  
  

  [IMAGE REMOVED DUE TO SIZE]

   

  As you can see - less than half my route is now 'snapped' leaving more than half - not even existing but a trace left behind

  [IMAGE REMOVED DUE TO SIZE]

  Any suggestions? 

  Thanks in advance

  Kristian

• plotaroute admin   Friday 04 Jun 2021 11:31:47

  Thanks for the suggestions - we appreciate the feedback. 

• Tour McTour   Friday 04 Jun 2021 04:22:49

  Hi, I'm trying to plot some routes based on other people's gps files, but in multiple areas they have taken tracks that are not shown on maps. When I Snap Route To Map most of the bits on roads or mapped tracks get cleaned up nicely, but these sections on unmarked tracks end up in completely the wrong place. There are also a few sections on the road where it decides to just take me in a different direction for no reason I can discern. Would it be possible to either:

  Have the Snap RouteTo Map function applied only to a selected range,

  or even better

  Have an Unsnap function, so when I review the route I can just say take this section back to what it was originally?

• Colin Hoppe   Tuesday 29 Sep 2020 08:46:44

  I've now uploaded two routes and anyone using this needs to be aware that a slight squiggle in the original route could lead to unintended, brief, out and back legs which might need to be tidied up using Replot Section.  Best to look very closely once the route is uploaded, but the new tool itself works very well for me.

   

• Fred Hiking   Tuesday 29 Sep 2020 07:09:48

  Thanks! Really great!

• Colin Hoppe   Monday 28 Sep 2020 18:26:24

  Excellent timing !  I've just uploaded a route ... and noticed this new option ... and it looks as if it works very well.  Thank you

• Peter Höglund Wednesday 23 Sep 2020 21:21:14

  Nice also that I can get the original trace as background:)