ROUTE PROFILE FOR: LIMPLEY STOKE TO AVONCLIFF

SELECTED SECTION: 2.939 km
ROUTE STATISTICS
CUSTOM LABELS
CATEGORISED CLIMBS
Distance 2.939 km   Ascent/Descent (Raw) 11 m / 20 m
Ascent Filter 5 m -+   Ascent/Descent (Filtered) 0 m / 5 m
Lowest Point 27 m (at 2.88 km)   Highest Point 36 m (at 0.00 km)
Uphill 0.63 km (21.4%)   Downhill 0.81 km (27.6%)
Flat 1.44 km (49.0%)   Height Gain 9 m
Steepest Uphill +2.2% (at 0.72 km)   Steepest Downhill -8.9% (at 2.79 km)
Longest Uphill 0.72 km (at 0.90 km)   Longest Downhill 0.27 km (at 2.25 km)
Ascent Rate 4 m/km   Descent Rate 7 m/km
ADD LABEL
No At Symbol Text  
No Starts At Length Height Gain Avg Grade Category
Category 4
Category 3
Category 2
Category 1
Hors Catégorie
Learn how we determine Climb Categories
SECTION SELECTOR
0.00
2.94
GRADIENT
FILTER
40.0%
0.0%
ELEVATION
INTERVAL
90 m
Chart Data
m ft
km miles
height %
Horiz. Vertical
RESET
  PRINT
  DOWNLOAD
  SHARE
Max. Y
Auto
Min. Y
0 m
Created with Highcharts 7.2.10m10m20m30m00.250.50.7511.251.51.7522.252.52.75plotaroute.com
DISTANCE IN KM
Distance from Start (km) Height Above Sea Level (m) Comments
0.00036Highest Point
0.09035 
0.18034 
0.27035 
0.36035 
0.45035 
0.54033 
0.63034 
0.72032Steepest uphill
0.81034 
0.90031Start of longest uphill
0.99033 
1.08034 
1.17034 
1.26034 
1.35034 
1.44034 
1.53034 
1.62034 
1.71033 
1.80033 
1.89035 
1.98035 
2.07035 
2.16035 
2.25035Start of longest downhill
2.34034 
2.43033 
2.52033 
2.61035 
2.70035 
2.79035Steepest downhill
2.88027Lowest Point
 
 
X

DELETE LABEL
Add/Edit Custom Labels

 km
(Max 30 chars.)
(Max 30 chars.) ENTER
 
X

Download Route Profile Chart

Download the route profile as an image.

JPG  
PNG  
1000 pixels
250 pixels
No  
Yes  
DOWNLOAD
 
X

Download Route Profile Data

Download the route profile data to an Excel or CSV file.

Excel  
CSV  
DOWNLOAD
 
X

Share this Route Profile

You can share this route profile using the following link. Your current settings and labels will be applied.
Link
COPY LINK
Share
 
X

DISPLAY NO SYMBOL
Select a symbol to use

 
X

Set the Maximum Value of the Y Axis

If you wish you can override the maximum value of the Y axis. This can be useful if you want the same Y axis range to be used for different routes so that they are visually comparable.

Auto  
Manual  
  
APPLY
 
X

About Climb Categories

To work out the Category of a climb, we multiply the length of the climb in metres by the gradient of the climb in percent to determine a score. This score is then used to determine the Category as follows:
Category 4 8000 or above
Category 3 16000 or above
Category 2 32000 or above
Category 1 64000 or above
Hors Catégorie 80000 or above

For example, a climb that goes on for 1km at an average gradient of 12.5% has a score of 1000 x 12.5 = 12500, which equates to Category 4.